I have a 1581 mounted internally on my 128DCR, but I just passed the external 1581 power supply through to it. The drive install looks decent, but the power situation is as messy as you might imagine.
I would prefer to replace the 128DCR power supply with something strong enough to power both.
From what I've found online, I need:
- 1581: GND, 5V DC 1A, 12V DC 0.5A
- 128DCR: GND, 5V DC 4.5A, 12V DC 1.2A, 9V AC .55A
I think I've found enough "stuff" on Amazon to make up a Frankenstein-esque unit, but I wanted to ask the kind and knowledgable folks on here if there are any better options.
I have a Small Form-factor PC power supply that gives enough 12V amperage for both and enough 5V amperage to accomodate the 1581. I also have a 120VAC "wall wart" that outputs 9VAC 1500mA, so it should be enough. So I need more 5V amperage. I'm thinking a 12V to 5V 5A buck convertor to provide the rest of the 5V needs?
Anyway, any adivce would be appreciated. I'll post pictures and a write-up of all this when it's done.
Thanks,
Kevin
Mean Well PD-65A AC-DC Dual output Open frame Power supply; Output 5Vdc at 7A +12Vdc at 3.2A
Mean Well RD-65A AC-DC Dual output enclosed power supply; Output 5Vdc at 8A +12Vdc at 4A
And a transformer to supply 9VAC
I have used a Mean Well PD-65A and a transformer which supplies 9VAC to replace a faulty 128DCR power supply
Wow, that's perfect. Thanks! I guess I was so locked into using the PC power supply in the build that I didn't think to look for the right part.
Thanks again,
Kevin